Package: 208 liters/drum
Information:
High performance fire-resistant phosphate ester based hydraulic fluid
APPLICATIONS
Hydraulic circuits |
- Total Hydransafe FR NSG 38 is a high performance, fire resistant hydraulic fluid based on selected phosphate esters and designed for hydraulic circuits which require the use of safety fluids.
- Total Hydransafe FR-NSG 38 is especially designed for use in electrohydraulic governor systems of steam turbines, including systems using fine tolerance servo valves.
- Working temperature : – 10 to + 120°C.
|
SPECIFICATIONS
- International specifications
- OEMs
|
- ISO 6743/4 – HFDR
- ISO 12922 – HFDR
- AFNOR E48-602 / 48-603 – HFDR
- GE-GEK 46357E
- GEC ALSTHOM – SBV PR 1001C
- ABB – HTGD 690 149 V0001K
- SIEMENS KWU – TLV 9012 02
- EDF Electricité de France HN 20-S-41
- WESTINGHOUSE
|
ADVANTAGES
Total Hydransafe FR-NSG 38 is a fluid free of water which displays superior fire resistance properties (ISO Standard 12922). It has an excellent overall performance in hydraulic circuits and hydraulic governor systems of steam turbines according to OEM requirements :
- Good lubrication performance and anti-wear properties.
- Excellent oxidation stability.
- Low volatility.
- Prevention of foaming and very quick air release.
- Good resistance to hydrolysis and very quick demulsibility.
- Excellent shear stability.
- Good filterability
SPECIAL INSTRUCTIONS
Total Hydransafe FR-NSG 38 is not miscible with conventional hydraulic mineral oils or with water-glycol fluids. However Total Hydransafe FR-NSG 38 can generally be mixed in any proportion with phosphate ester based fluids.
Certain precautions must be taken when using Total Hydransafe FR-NSG 38 especially in an equipment designed to be used with a mineral oil :
- Seals and hoses : these fluids are not compatible with conventional elastomers. Use only fluorinated elatomers (Viton – Teflon).
- Paints : Total Hydransafe FR-NSG 38 will cause normal paints to dissolve or swell. It is best to avoid using paints on tanks (special resins are available that are compatible with phosphate esters).
As a general rule we recommend that the user consult AFNOR E 48-640 on “How to use fire-resistant fluids”.
TYPICAL CHARACTERISTICS |
METHODS |
UNITS |
Total Hydransafe FR NSG 38 |
Appearance |
Visual |
– |
Clear yellow fluid |
Specific gravity at 20 / 20°C |
ISO 3675 |
– |
1.130 |
Kinematic viscosity at 40°C |
ISO 3014 |
mm2/s |
43.4 |
Kinematic viscosity at 100°C |
ISO 3014 |
mm2/s |
5.0 |
Acid Number |
ISO 6619 |
mgKOH/g |
0.06 |
Pour Point |
ISO 3016 |
°C |
– 20 |
Water Content |
ISO 760 |
% |
< 0.06 |
Chlorine content |
microcoulometric |
ppm |
25 |
Volume Resistivity at 20°C |
IEC 247 |
Mohm m |
100 |
Foaming |
Seq. 1 |
ISO 6247
|
ml/ml |
30 / 0 |
Seq. 2 |
ml/ml |
10 / 0 |
Seq. 3 |
ml/ml |
10 / 0 |
Air Release at 50°C |
ISO 9120 |
min |
1 |
Demulsification |
ISO 6614 |
min |
1 |
Particulate contamination |
ISO 4406 |
Class |
15 / 12 |
Fire Resistance Properties |
Flash Point OC |
ISO 2592 |
°C |
270 |
Fire Point |
ISO 2592 |
°C |
368 |
Autoignition Temperature |
ASTM D2155 |
°C |
575 |
Spray Test |
VII Lux. § 3.1.2. |
|
|
Persistence of burning |
ISO 15029-1 |
s (cotation) |
6 (pass) |
Spray test |
VII Lux. § 3.1.3 |
|
|
Ignitability Index Class |
ISO 15029-2 |
class |
D |
Spray Test |
|
|
|
Persistence of burning |
Factory Mutual standard |
s (cotation) |
3 (pass) |
Spray Flammability Parameter (SFP) |
Std 6930 |
|
|
Wick Ignition |
|
Group |
Group 1 |
Persistence of burning |
ISO 14935 |
s (cotation) |
5 (pass) |
Hot Manifold test at 704°C |
ISO 20823 |
cotation |
pass |