• Lubricated screw air compressors

• Mineral oils with specific additivation for lubrication of lubricated rotary air compressors.
• Total Dacnis VS is characterized by its longer drain interval, which can reach 3000-3500h for lubricated rotary compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised.

• International specifications
• O.E.M.’s

• Total Dacnis VS satisfies ISO DP 6521 and DIN 51506 VD-L requirements.
• ISO 6743-3 heavy-duty use: DAJ classification.
• ATLAS COPCO, COMPAIR, HYDROVANE, ….

• Optimized operating efficiencyMinimized operating cost

• The formulation of the Total Dacnis VS endows them with the following properties :

– good thermal and oxidation stability and hence a drain interval of 3000-3500h under standard conditions of use,

– reduction in the formation of carbonaceous deposits,

– better oil/air and oil/condensates separation to prevent formation of emulsion and protect the air/oil separating filter,

– protection of screws against wear and corrosion.

• Use of Total Dacnis VS enables real reductions in the operating cost of the compressed air power plant by:

– optimizing operating efficiency,

– increasing the drain intervals:

• 1000 h for field compressors

• from 200 to 3000 h for fixed compressors in standard use, and up to 4000 h with lubricant analysis monitoring

– extending the service life of the separating filter elements

TYPICAL CHARACTERISTICS

METHODS

UNITS