Package: 208 liters/drum

Infomation:

Automatic transmission fluid

THE ESSENTIAL

AUTOMATIC TRANSMISSION LUBRICANT POWER STEERING APPLICATION HEAVY DUTY AND PASSENGER CAR APPLICATION MINERAL BASE OIL HIGH FRICTION PROPERTIES STANDARD DRAIN INTERVAL

LEVELS ✓ GM Dexron® IID ✓ Ford Mercon® ✓ ZF TE ML 14A

APPLICATIONS

Total Fluidmatic IID is recommended for some automatic transmissions in heavy duties specifying Dexron IID level performance as well as the related power steering systems. It is also suitable for use in some special hydraulic systems in farm equipment and other installations having similar fluid requirements. Its specific formulation combines high-quality conventional base oils and additives including viscosity index improvers, antioxidants, and defoaments.Total Fluidmatic IID is compatible with all the common seal materials used in Type IID transmissions. This product provides consumers an excellent driving experience even in broad range of driving conditions.

BENEFICTS FOR CUSTOMERS

• Adapted drain interval: it keeps an efficient operation during the drain interval recommended by OEM.
• High friction properties: it enables a smooth and lasting shift to promote longer transmission life.
• High oxidation stability: it keeps its properties in severe service operating conditions.
• High low-temperature fluidity: it helps to improve start-up and fast clean lubrication at low ambient temperatures.
• High compatibility: it prevents oil leakage

CHARACTERISTICS

Test	Unit	Test method	Result
Density at 15 °C	kg/m3	ASTM D1298	0.850
Viscosity kinematic at 100 °C	mm2/s	ASTM D445	7.50
Brookfield Viscosity at -40°C	cP	ASTM D5293	< 50.000
Colour	–	ASTM D1500	Red

RECOMMENDATIONS FOR USE

Before using the product, it is important to check the service manual of the vehicle: the drain is carried out according to the manufacturer’s requirements. The product should not be stored at a temperature above 60 °C while avoiding exposure to strong sunlight, extreme cold or high temperature variations. All packages should be protected from bad weather conditions. Otherwise, the drums should be stored horizontally to avoid a possible contamination by water and the damage of the product label.

HEALTH, SAFETY AND ENVIRONMENT

Based on available information, this product does not cause adverse health effects when used in the intended application and the recommendations provided in the Safety Data Sheet (MSDS) are followed. The information is accessible on request from your local dealer or on the website www.quickfds.com. This product should not be used for applications other than those for which it is intended. If disposing of used product, take care to protect the environment and comply with local regulations.

Package: 208 liters/drum

Information:

Download

Automatic transmission fluid

Meets the requirements

• GM Dexron® IIIG
• Ford Mercon®

Suitable for

• ZF TE ML 14A
• Allison C4

APPLICATIONS

• FLUIDMATIC IIIG is an automatic transmission fluid that meets GM Dexron® IIIG and Ford Mercon® standards.
• This lubricant is formulated with premium base stocks and carefully selected additives to meet the challenging demands of an automatic transmission environment.
• FLUIDMATIC IIIG is a well balanced fluid for heavy duty commercial vehicles and passenger cars equipped with automatic transmissions thanks to friction modifiers, detergent dispersants, oxidation inhibitors, viscosity index improvers, corrosion inhibitors and de-foaming agents.
• FLUIDMATIC IIIG is a high-quality friction-modified lubricant previously qualified by both General Motors and Ford.

BENEFICTS FOR CUSTOMERS

• Standard drain interval: it depends on the automatic gearboxes and the application. The lubricant keeps an efficient operation over the fill life.
• Special friction properties: it ensures smooth gear shifting without shudder.
• Excellent oxidation stability: it avoids the deterioration of its properties thanks to an adapted antioxidant and detergent level.
• Effective Low Temperature Fluidity : it avoids surge or sudden overload of circuits when starting in very cold weather.
• Excellent elastomers compatibility: it prevents oil leakage.

CHARACTERISTICS

Test	Unit	Test method	Result
Colour	–	ASTM D1500	Red
Density at 15°C	kg/m3	ASTM D4052	849.8
Kinematic Viscosity at 40°C	mm2/s	ASTM D445	33.73
Kinematic Viscosity at 100°C	mm2/s	ASTM D445	7.296
Brookfield Viscosity at -40°C	cP	ASTM D2983	9548
Viscosity Index	–	ASTM D2270	190
Pour Point	°C	ASTM D97	-51
Flash Point COC	°C	ASTM D92	208

The features mentioned above are average values obtained with some variability in production and do not constitute a specification.

RECOMMENDATIONS FOR USE

• Before using the product, it is important to check the service manual of the vehicle: the drain is carried out according to the manufacturer’s requirements.
• The product should not be stored at a temperature above 60 °C while avoiding exposure to strong sunlight, extreme cold or high temperature variations.
• All packages should be protected from bad weather conditions. Otherwise, the drums should be stored horizontally to avoid a possible contamination by water and the damage of the product label.

HEALTH, SAFETY AND ENVIRONMENT

• Based on available information, this product does not cause adverse health effects when used in the intended application and the recommendations provided in the Safety Data Sheet (MSDS) are followed. The information is accessible on request from your local dealer or on the website www.quickfds.com.
• This product should not be used for applications other than those for which it is intended.
• If disposing of used product, take care to protect the environment and comply with local regulations.