PLASTOGREASE® range was formulated by LUBRILOG from saponified synthetic oils. These greases can be used for a variety of industrial applications such as automotive, micro mechanics and connectors. These greases are of particular interest wherever the plastics are involved or wherever a low friction at low temperature is required.

ADVANTAGES:

• Good compatibility with plastics and elastomers
• Good thermal and mechanical stability
• Very low coefficient of friction
• Excellent antisqueack properties
• Can be used at very low temperatures
• Very good viscosity index
• Good adhesion, depending on grades

APPLICATIONS:  Automotive, other market…

Product		Consistency (NLGI Grade)	Viscosity 40°C (mm²)	Thickener	Base oil	Rotation factor (N.Dm)	Temperature °C
							Min	Max
PLASTOBASE 32		2	26	Lithium	Semi Synthenic	>800 000	-50	130
PLASTOBASE 760		1-2	760	Lithium	Semi Synthenic	>250 000	-40	150
PLASTOGREASE BASE		3	22	Lithium	PAO	>800 000	-50	150
PLASTOGREASE TIXO		2	32	Lithium+Gel	PAO	>800 000	-50	150
PLASTOGREASE TAC		2	46	Lithium	PAO	>500 000	-50	150
PLASTOGREASE TF		2	35	Lithium+PTFE	PAO	>500 000	-50	150
PLASTOGREASE TFH		2	750	Lithium+PTFE	PAO	>250 000	-40	150

STARGREASE®

HIGH PERFOMANCE MULTI-PURPOSE GREASES

STARGREASE® range greases are made from semi-synthetic base oils and high technology sulpho-carbonates complexes. Thanks to their composition, these greases have exceptional, inherent antiwear and extreme pressure properties coupled with excellent resistance to heat, steam and diluted chemical agents.

ADVANTAGES:

• Excellent protection against corrosion
• High thermal and mechanical stability
• Very high pressures resistance
• Resistant to washing out
• Non toxic (heavy metals free)
• Very long lifetime even at high temperatures
• Highly adhesive
• Excellent alternative to the greases based on Barium soap

APPLICATIONS : Raw material industries (Mining industry, Cement plants, Fertilizer industry, Power stations (coal), Steel, Aluminum, Chemical, Environment, etc.)

Product		Consistency (NLGI Grade)	Viscosity 40°C (mm²)	Thickener	Base oil	Speed factor (N.Dm)	Temperature °C
							Min	Max
STARGREASE LIGHT		2	68	Calcium Sulfonate Complex	PAO/Mineral	>600 000	-40	150
STARGREASE MEDIUM		3	1000	Calcium Sulfonate Complex	PAO/Mineral	>250 000	-22	250
STARGREASE HEAVY		2	68	Calcium Sulfonate Complex	PAO/Mineral	>600 000	-40	150
STARGREASE HV		2	420	Calcium Sulfonate Complex	PAO/Mineral	>350 000	-25	180
STARGREASE LSK 2		2	460	Complex/Complex	PIB/Mineral	>600 000	-20	160
STARGREASE LSK 2 M		2	460	Complex / Cpmplex + MoS₂	PIB/Mineral	>100 000	-20	160

GRAFOLOG®

GREASES FOR OPEN GEAR DRIVES

The GRAFOLOG® range of greases are dedicated to the lubrication of heavy duty open gear drives used in the following industries : Cement, ore, steel, coal lines in the thermal stations, fertilizers, chemicals (lateral transmissions of furnaces, grinders, dryers, coolers, mixers and rotating tubes in general)

ADVANTAGES :

• Exceptional resistance to seizing
• Excellent antiwear and extreme pressure resistance properties
• Resistance to high temperatures
• Excellent performance under heavy loads and slow speed
• Aluminium complex based soap thickener
• High purity mono crystalline graphite

APPLICATIONS : Raw material industries (Mining industry, Cement plants, Fertilizer industry, Power stations (coal), Steel, Aluminum, Chemical, Environment, etc.)

Product	Consistency (NLGI Grade)	Viscosity 40°C (mm²/s)	Thickener	Base oil	Temperature range °C		Weld load 4 balls (daN)
					Mini	Maxi
GRAFOLOG H 00 LT	00	130	Aluminium Complex	Semi-synthetic	-40	150	>700
GRAFOLOG H 0	0	750	Aluminium Complex	Mineral	-20	120	>620
GRAFOLOG H 0 +	0/1	1100	Aluminium Complex	Mineral	-10	180	>620
GRAFOLOG H 2200	0/00	2200	Aluminium Complex	Mineral	0	180	>620
GRAFOLOG H 10 K	0/00	10000	Aluminium Complex	Mineral	0	180	>700
GRAFOLOG M FLUID	000	3000	Aluminium Complex	Mineral	-10	120	>800
GRAFOLOG MT FLUID	000/00	7500	Aluminium Complex	Mineral	0	140	>800
GRAFOLOG H 00 R	00	320	Aluminium Complex	Mineral	-10	200	>800
GRAFOLOG R FLUID	000	2000	Aluminium Complex	Mineral	-10	120	>800
GRAFOLOG H 1	1	1100	Aluminium Complex	Mineral	-20	120	>500

FLUOLOG®

STANDARD FLUORINATED GREASES

FLUOLOG® represents a range of greases based on perfluorinated oils. FLUOLOG® greases are recommended when the other lubricants, mineral or synthetic, cannot meet the requested specifications.

ADVANTAGES :

• Exceptional high-temperature stability
• Excellent chemical inertness (gas and aggressive liquids)
• Non-flammable
• Total compatibility with plastics and elastomers
• Very long life time
• Very low friction
• Very low vapor tension
• Good resistance to nuclear radiations

APPLICATIONS :

• Cardboard factory
• Tyres
• Automotive
• Overhead conveyors
• …

Product	Consistency (NLGI Grade)	Viscosity 40°C (mm²/s)	Thickener	Base oil	Temperature range °C		% Evaporation after 22h
					Mini	Maxi
FLUOLOG K 258	2	8	PTFE	PFPE	-70	80	10/90°C
FLUOLOG K 259	2	15	PTFE	PFPE	-60	120	9/120°C
FLUOLOG KEL	2	15	PTFE	PFPE	-60	120	8/120°C
FLUOLOG LMX 2	2	85	PTFE	PFPE	-70	220	3/204°C
FLUOLOG KEM	2	90	PTFE	PFPE	-40	200	2/149°C
FLUOLOG LX 2	2	90	PTFE	PFPE	-40	200	2/149°C
FLUOLOG KES	2	220	PTFE	PFPE	-30	250	0.7/149°C
FLUOLOG 2 L	2	220	PTFE	PFPE	-30	250	0.7/149°C
FLUOLOG MX 2	2	220	PTFE	PFPE	-30	300	0.5/149°C
FLUOLOG MG 2	2	220	Gel	PFPE	-30	250	0.5/149°C
FLUOLOG K 400	2	395	PTFE	PFPE	-30	260	0.9/204°C
FLUOLOG K 500	2	500	PTFE	PFPE	-30	300	0.5/204°C

FLUOSTAR® FOOD GRADE

NSF H1 FLUORINATED GREASES

FLUOSTAR® symbolizes a range of very high quality greases based of specific perfluorinated oils. FOOD GRADE series should be used for the lubrication of bearings, seals and various assemblies operating in extreme conditions incidental contact with food. Greases FLUOSTAR® FG / SX and LUBRINOX were approved NSF H1 and have the same benefits that classic FLUOSTAR® range.

ADVANTAGES :

• Exceptional stability at high temperatures
• Excellent resistance to water and chemicals
• Non-flammable
• Full compatibility with plastics and elastomers
• Very long life
• Very low friction
• Good viscosity-temperature behavior
• Very low vapor pressure
• Good resistance to nuclear radiation
• Non-toxic: Approval USDA-H1

APPLICATIONS : Food Industry (cooking tunnel chains, bearings, etc…).

Product	Consistency (NLGI Grade)	Viscosity 40°C (mm²/s)	Thickener	Base oil	Temperature range °C		% Evaporation after 22h
					Mini	Maxi
FLUOSTAR FG 2	2	500	PTFE	PTFE	-30	300	0.5/204°C
FLUOSTAR 2 L	2	150	PTFE	PTFE	-40	240	1.5/204°C
FLUOSTAR K 240	2	240	PTFE	PTFE	-30	260	1.3/204°C
FLUOSTAR K 500	2	500	PTFE	PTFE	-30	300	0.3/204°C
FLUOSTAR SX 1	1	310	PTFE + Gel	PTFE	-60	320	0.4/204°C
FLUOSTAR SX 2	2	310	PTFE + Gel	PTFE	-60	320	0.4/204°C
LUBRINOX 2	2	510	Gel	PTFE	-30	320	0.5/204°C

FLUOSTAR ®

SPECIAL FLUORINATED GREASES

FLUOSTAR® represents a range of high quality greases based on specific perfluorinated oils.

FLUOSTAR® greases are recommended when the other lubricants, mineral or synthetic, cannot meet the most demanding specifications.

ADVANTAGES :

• Exceptional high-temperature stability
• Excellent chemical inertness (gas and aggressive liquids)
• Non-flammable
• Total compatibility with plastics and elastomers
• Very long durability
• Very low friction
• Good viscosity-temperature behavior
• Very low vapor pressure
• Good resistance to nuclear radiations

APPLICATIONS :

• Cardboard factory
• Tyres
• Automotive
• Overhead conveyors
• …

Product	Consistency (NLGI Grade)	Viscosity 40°C (mm²/s)	Thickener	Base oil	Temperature range °C		% Evaporation after 22h
					Mini	Maxi
FLUOSTAR L 2 L	2	15	PTFE	PTFE	-60	120	10/120°C
FLUOSTAR 2 L	2	150	PTFE	PTFE	-40	240	1.5/204°C
FLUOSTAR H 2 PLUS	2	400	PTFE	PTFE	-30	260	0.9/204°C
FLUOSTAR FH 2	2	500	PTFE	PTFE	-30	300	0.5/204°C
FLUOSTAR LX 2	2	100	PTFE	PTFE	-50	200	2.5/204°C
FLUOSTAR MX 2	2	200	PTFE	PTFE	-50	250	1.5/204°C
FLUOSTAR HX 2	2	400	PTFE	PTFE	-40	300	0.5/204°C
FLUOSTAR SX 2	2	310	PTFE + Silica Gel	PTFE	-60	320	0.4/204°C
FLUOSTAR SG 2	2	310	Silica Gel	PTFE	-60	320	0.4/204°C
FLUOSTAR XL	2	32	PTFE	PTFE	-85	150	1.5/149°C
FLUOSTAR XM	2	200	PTFE	PTFE	-65	280	0.5/204°C
FLUOSTAR XS	2	700	PTFE	PTFE	-50	320	0.3/204°C

Multipurpose Lithium/Calcium grease

APPLICATIONS

Multipurpose grease General Lubrication

It is a multipurpose grease, recommended for the lubrication of the bearings and all mechanical parts in the temperature range -30 to 110°C Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

SPECIFICATIONS

International Specification

ISO 6743-9: L-XCCEA3; DIN 51502: K3H-30

ADVANTAGES

Mechanical stability Thermal stability

Multipurpose grease Miscible with the most other conventional soap greases Good mechanical stability Good thermal stability

CARACTHERISTICS	METHODS	UNITS	LICA 3
NLGI Class	ASTM D 217	–	3
Soap/thickener		–	Lithium / Calcium
Appearance	Visual	–	Smooth
Color	Visual	–	Pale-brown
Dropping point	ASTM D 2265	°C	>170
Penetration at 25°C	ASTM D 217	0.1 mm	220 – 250

Multipurpose Lithium/Calcium grease

APPLICATIONS

Multi purpose grease General Lubrication	LICA 2 is a multipurpose grease, recommended for the lubrication of the bearings and all mechanical parts in the temperature range from -30 to110°C
Recommendation	Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

SPECIFICATIONS

– ISO 6743-9: L-XCCEA
– DIN 51 502: K2H-30

ADVANTAGES

Miscible Mechanically stable No harmful substance

Because of its true multipurpose character, LICA 2 may replace a wide range of greases, allowing stock rationalization and simplification of maintenance.

TYPICAL CHARACTERISTICS	METHODS	UNITS	LICA 2
Soap/thickener		–	Lithium/ Calcium
NLGI grade	ASTM D 217/DIN 51 818	–	2
Color	Visual	–	Pale brown
Appearance	Visual	–	Smooth
Operating temperature range		°C	-25 to 120
Penetration at 25°C	ASTM D 217/DIN51 818	0.1 mm	265 – 295
Dropping point	ASTM D 2265	°C	>170°C
Kinematic viscosity of the base oil at 40°C	ASTM D 445/DIN 51 562-1/ISO 3104/IP71	mm²/s (cSt)	110

Package: 180kg/drum

Information:

Water resistant calcium grease

APPLICATIONS

Water resistant grease marine application Recommendation

Total Merkan 2A 3A is pre-eminently designed for the lubrication of slow rotating slide bearings and articulations where it meets a wide variety of ‘outdoor’ and inland marine requirements. Its range of applications is extensive. Total Merkan 2A 3A is also suitable as a non “EP” general purpose grease in a wide range of ‘outdoor’ applications where water is in frequent contact with the grease. Always avoid contamination of the grease by the dust and/or dirt when applying. Preferably use a pneumatic pump system.

PERFORMANCES

Specifications

ISO 6743-9: L-XBAHA 2/3 DIN 51502: M2/3C-20

CLIENT ADVANTAGES

Water resistant Pumpability No harmful substances

Total Merkan 2A 3A is insoluble in water, leading to a remarkable resistance to water washout. Because of the smooth and fluid structure, Total Merkan 2A 3A is easily pumpable and therefore suitable for centralized lubrication systems. Total Merkan 2A 3Acontains no lead, or other heavy metals considered harmful to human health and the environment.

CHARACTERISTICS

Total Merkan	METHODS	UNITS	Total Merkan 2A	Total Merkan 3A
Soap/thickener		–	Calcium	Calcium
NLGI grade		–	2	3
Colour		–	Greenish	Greenish
Appearance	VISUAL	–	Smooth/tacky	Smooth/tacky
Operating temperature range		°C	-30 to 60	-20 to 60
Penetration at 25°C	ASTM D217	0.1 mm	265 to 295	220 to 250
Dropping point	ASTM D566	°C	90	95
Viscosity of the base oil at 40°C		mm2/s	36	36

 

Package: 180kg/drum, 18kg/bucket

Information:

Extreme-pressure water resistant high temperature “NEW GENERATION” calcium sulfonate complex grease

APPLICATIONS

Multi purpose heavy duty water resistant grease. Shock loaded applications in industry even in severe demanding environment (water, dust, high temperature).

Total Ceran XM 460 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubrifiants. This new soap has enhanced properties in terms of water and thermal resistance, load capacity, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high loads. Total Ceran XM 460 is suitable for the lubrication of all kinds of components subject to high loads and temperatures, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances). Total Ceran XM 460 is suitable for the lubrication of bearings in steel plants (continuous castings and rolling mills) and in paper industry. Total Ceran XM 460 is also suitable for the lubrification of hard wood granular presses and in all industrial applications under severe conditions (wet, loaded, high temperature, dust,…) namely mining and cement industries. Total Ceran XM 460 is suitable for use in centralized greasing systems. Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

SPECIFICATIONS

• ISO 6743-9: L-XBFIB 1/2
• DIN 51 502: KP1/2R -25

ADVANTAGES

True multi purpose. Shock loads. Water resistant. Anti corrosion. NEW GENERATION allowing use in high speed factors. No harmful substances

The NEW GENERATION of calcium sulfonate complex soap developed by TOTAL Lubrifiants allows Total Ceran XM 460 to present outstanding performances even at high nDm. This NEW GENERATION keeps all benefits in terms of corrosion protection, bearings lifetime, high loads and thermal resistance. Excellent anti-oxidation and anti-corrosion properties thanks to the excellent behaviour of the calcium sulfonates, also in the presence of sea water. The NEW GENERATION of calcium sulfonate complex soap allows to keep outstanding Total Ceran XM 460 performances even in case of high speed applications where normally polyurea or lithium complex greases are requested. Total Ceran XM 460 does not contain lead, or other heavy metals considered harmful to human health and the environment.

TYPICAL CHARACTERISTICS	METHODS	UNITS	Total Ceran XM 460 (typical values)
Soap/thickener		–	Calcium sulfonate complex
NLGI grade	ASTM D 217/DIN 51 818	–	1 – 2
Color	Visual	–	Brown
Appearance	Visual	–	Smooth
Operating temperature range	ASTM D 445/DIN 51 562-1/ISO 3104/ IP71	°C	– 25 to 180
Kinematic viscosity of the base oil at 40°C		mm²/s (cSt)	460
Mechanical stability
Penetration at 25°C	ASTM D 217/DIN 51 818	0.1 mm	280 – 310
Penetration after 100 000 strokes	ISO 2137	0.1 mm	+21
Shell Roller 100 hours at 80°C	ASTM D 1831 mod	0.1 mm	0
Shell Roller 100 hours at 80°C + 10% water	ASTM D 1831 mod	0.1 mm	-34
Thermal stability
Dropping point	IP 396	°C	> 300
Oil release 50 hours, 100 °C	ASTM D 6184	%	1.7
Oil release 168 hours, 40°C	NF T 60-191	%	1.1
Oxidation stability at 99°C +-0.5°C
Pressure drop after 100 hours	ASTM D 942	Psi	5
Pressure drop after 500 hours		Psi	16
Antirust properties
EMCOR, distilled water	ISO 11007	Rating	0 – 0
EMCOR, synthetic sea water	ISO 11007	Rating	0 – 0
Copper corrosion, 24 hours at 100°C	ASTM D 4048	Rating	1b
Antiwear and EP properties
Four ball wear (scar diameter)	ASTM D2266	mm	0.43
Four ball weld load	ASTM D2596	kgf	500
Cold properties
Penetration at -20°C	ISO 13737	0.1 mm	95
Flow pressure at -20°C	DIN 51 805	mbar	1160
Flow pressure at 1400 mbar	DIN 51 805	°C	-25
Torque at -20°C
Starting torque	ASTM D 1478	g.cm	890
After 1 hour		g.cm	72