• Lubrication and cooling of the following types of air compressors:

– high pressure reciprocating air compressor (ISO VG 100)

– screw and rotary vane air compressor (ISO VG 46, 68 or 100)

– turbocompressors (ISO VG 68)

– vacuum pumps (ISO VG 100).

• NF-ISO 6743 classified DAC and DAJ for heavy duty applications.
• DACNIS SE meets the DIN 51 506 VDL requirements.

• Performances under heavy duty conditions
• Wide operating conditions

• Excellent thermal stability of the lubricant under high temperature conditions.
• Low foaming tendency for turbocompressor applications.
• Compressor start up by -20°C.
• Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

• Total Pneuma are formulated from high quality base stocks and specific additives.
•  Meet the requirements of pneumatically operated rock drills lubrication in underground and surface mining operation.

• Long lasting equipment
• Operating cost savings

•  High impact strenght due to the extreme pressure additivation preventing the equipment wear.
• Adhesive and emulsifiable properties to drain increase to tools lifetime water off and maintain continuous oil film.
•  Antirust to protect the equipments and increase their lifetime.
•  High tackiness reducing oil mist pollution and oil consumption.

• Lubricated screw air compressors

• Mineral oils with specific additivation for lubrication of lubricated rotary air compressors.
• Total Dacnis VS is characterized by its longer drain interval, which can reach 3000-3500h for lubricated rotary compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised.

• International specifications
• O.E.M.’s

• Total Dacnis VS satisfies ISO DP 6521 and DIN 51506 VD-L requirements.
• ISO 6743-3 heavy-duty use: DAJ classification.
• ATLAS COPCO, COMPAIR, HYDROVANE, ….

• Optimized operating efficiencyMinimized operating cost

• The formulation of the Total Dacnis VS endows them with the following properties :

– good thermal and oxidation stability and hence a drain interval of 3000-3500h under standard conditions of use,

– reduction in the formation of carbonaceous deposits,

– better oil/air and oil/condensates separation to prevent formation of emulsion and protect the air/oil separating filter,

– protection of screws against wear and corrosion.

• Use of Total Dacnis VS enables real reductions in the operating cost of the compressed air power plant by:

– optimizing operating efficiency,

– increasing the drain intervals:

• 1000 h for field compressors

• from 200 to 3000 h for fixed compressors in standard use, and up to 4000 h with lubricant analysis monitoring

– extending the service life of the separating filter elements

TYPICAL CHARACTERISTICS

METHODS

UNITS 

• Rotary air compressors

• Lubrication and cooling of the following types of air compressors:- rotary screw compressors (ISO VG 32, 46, 68)- reciprocating compressors (ISO VG 100).
• Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

• International specifications

• ISO 6743 classified DAJ for heavy duty applications.

• Compressor efficiency optimised
• Operating cost minimised

• The properties of Total Dacnis SH :

– avoids the carbon build up

– allows a good oil/air and oil/condensates separation

– protects the screws against wear and corrosion.

The use of Total Dacnis SH  allows real cuts in the operating costs of the compressed air production facility by:

• Optimising the compressor efficiency
• Extending the drain intervals. The possible achieved drain intervals can be:

– from 4000 to 6000 hours for fixed compressors in standard use

– up to 8000 hours with lubricant analysis monitoring.

• Extending the service life of the separating filter elements.

The Total Dacnis SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

TYPICAL CHARACTERISTICS

METHODS

UNITS 

• Rotary and reciprocating aircompressors

• Mineral oils with specific high performance additives designed to lubricate screw andreciprocating air compressors:. for screw compressors : Total Dacnis 32, 46, or 68. for reciprocating compressors : Total Dacnis 68, 100 or 150.
• For use in conditions where the discharge temperature does not exceed 100°C,otherwise, the use of synthetic oils is preferred.

• Internationalspecifications
• O.E.M.’s

• ISO 6743-3 classified DAG & DAB for heavy duty applications.
• DIN 51 506 VD-L for the use of Total Dacnis 100 & 150 in reciprocating air compressors.
• Depending on the viscosity grades, Total Dacnis meet the requirements of :BAUER, CIRRUS, COMPAIR, DRESSER RAND,NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT,TANABE…

• Compressor efficiencyoptimised
• Operating costminimised

• The properties of Total Dacnis :- avoid the carbon build up- allow a good oil/air and oil/condensates separation- protect components against wear and corrosion.
• The use of Total Dacnis allows real cuts in the operating costs of the compressed airproduction facility by optimising the compressor efficiency.
• Extending the service life of the separating filter elements. The Total Dacnis have an anti- clogging property that ensures the efficiency of the filters during a long period.

TYPICAL CHARACTERISTICS

METHODS

UNITS