Package: 20 liters/can

Information:

Download

Synthetic cutting fluid for machining and grinding a wide range of metals

UTILISATIONS

• Total Vulsol MSF 7200 is recommended for machining and grinding steel and its alloys as well as non ferrous metals.
• Total Vulsol MSF 7200 is also designed for machining plastic materials as well as for machining and polishing special optical lenses.
• Recommended rates of use:

– grinding: 3 – 4%

– machining: 4 – 7%

SPECIFICATIONS

ISO 6743/7

ISO-L MAH

ADVANTAGES

• Total Vulsol MSF 7200 is very easy to use, simply by pouring it into good qualitynwater.
• Excellent cooling and lubricant power.
• Efficient protection of machined parts and machines against corrosion.
• Good mechanical performances, providing:

– Reduced cutting efforts

– Extended tool lifetime

– Very good surface finish to parts.

• Properties in service:

– Excellent stability over time increases drain intervals;

– Cuttings have low rate of humidity;

– Good anti-foaming properties.

• Resist to the development of bacteria and mould very well, so is more environmentally and operator friendly.
• Very multifunctional.
• Very good separation of tramp oils and settling of sludges.
• Very good detergent power.

HEALTH AND SAFETY

• Does not contain: formaldehyde liberators or boron.
• Is free of: chlorine, PTBB, nitrite, DEA and phenol.

TYPICAL CHARACTERISTICS	METHODS	UNITS	VULSOL MSF 7200
			CONCENTRATE	SOLUTION AT 5%
Density at 15°C	ISO 3675	kg/m3	1122
Viscosity at 40°C	ISO 3104	mm2/s	83
pH	NF T 60 193			9.2
Refractometric factor			1.0

RECOMMENDATIONS FOR USE

• To ensure good conservation of the fluid’s properties through time and thus increase its lifetime, we recommend:

– Regular monitoring of the concentration of the bath with a refractometer. Do not forget to multiply the reading value by the refractometric factor.

– Regular monitoring of the pH of the emulsion and the hardness of the water.

• Total offers its clients a regular laboratory fluid analysis service:

SOLUBLE CHECK.

Get in touch with your sales contact to obtain further information.

• Before using any fluid for the first time or before each change, we recommend cleaning the machine with a specific cleaning product:

CONTRAM CB 3.

• If punctual top-ups of Biocide are required, Total offers an efficient product:

EBOTEC BT 80.

Your sales and technical contacts are ready to provide you further information.

 

Package: 208 liters/drum

Information:

Download

Light coloured chlorine containing multi purpose cutting lubricant

APPLICATIONS

Mainly dedicated for CNC autolathe work on both ferrous and non- ferrous alloys:

• Drilling
• Forming
• Threading
• Turning
• Reaming
• Cutting-off
• Tapping

CLIENT ADVANTAGES

Technical profile

Low tendency to form oil mist Light colour to provide high workpiece visibility Reinforced unctuosity to ensure strong lubrication film Fortified antirust properties to avoid corrosion of tools, parts and machines High extreme pressure properties to eliminate the formation of built-up edge (BUE) on tools

CHARACTERISTICS

VALONATYPES	Unit	MS 5030 CL
Specific gravity at 15°C	ISO 3675	kg/m3
Kinematic viscosity at 40°C	ISO 3104	mm2/s
Kinematic viscosity at 100°C	ISO 3104	mm2/s
Flash point OC	ISO 2592	°C
Aniline point	ISO 2977	°C

.

Package: 208 liters/drum

Information:

Download

Soluble Cutting Oil

APPLICATIONS

• Routine machining of non-ferrous metals and high-grade carbon steels. This product is specially designed for the machining of copper alloys and free cutting brass.
• Ensure low degree of moisture of chips.
• Recommended rate of use: 5% to 10% by volume

SPECIFICATIONS

ISO 6743/7

ISO-L MAA

CLIENT ADVANTAGES

Technical profile

Very easy use simply by pouring the oil into good quality water. Excellent stability in use, thus allow long intervals between oil changes (use NET MACHINE at 1%). Easy monitoring by analysis using refractometer. Exceptional antirust & antifoam properties. No harmful effect on good quality paintwork (baked epoxy types). Forms milky emulsion in water that is stable over time. Good resistance to bacterial growth.

CHARACTERISTICS

	METHODS	UNITS	LACTUCA LT 2 AP
Appearance	Visual	–	Clear
Volumetric mass at 15°C	ASTM D 4052	kg/m3	892
Colour	ASTM D 1500	–	3.0
Viscosity at 40°C	ASTM D 445	mm2/s	46
Flash point	ASTM D 92	°C	188
5% emulsion in 200ppm HW: – pH	Internal	–	9.1
Solution Water Type	Visual		Emulsion
Appearance	Visual	–	Milky white
Cast Iron Corrosion Test	IP 125	–	0 / 0-0
Filter/Chip Corrosion Test	IP 287	–	Stain (5%)
Foaming Study		–
Initial Foam (0 min)	Internal	ml	10
Collapse Time		mins	15 sec – nil
Refractometric correction factor			1