Shop

Dầu tổng hợp gia công cắt gọt Total Vulsol MSF 7200

Total Vulsol MSF 7200 được khuyến nghị trong việc gia công và nghiền thép, các hợp kim và kim loại không chứa sắt. Total Vulsol MSF 7200 cũng được thiết kế để gia công các vật liệu nhựa cũng như để gia công và đánh bóng các ống kính quang học.

Mô tả sản phẩm

 

Package: 20 liters/can

Information:

Download

Synthetic cutting fluid for machining and grinding a wide range of metals

UTILISATIONS

  • Total Vulsol MSF 7200 is recommended for machining and grinding steel and its alloys as well as non ferrous metals.
  • Total Vulsol MSF 7200 is also designed for machining plastic materials as well as for machining and polishing special optical lenses.
  • Recommended rates of use:

– grinding: 3 – 4%

– machining: 4 – 7%

SPECIFICATIONS

ISO 6743/7 ISO-L MAH

ADVANTAGES

  • Total Vulsol MSF 7200 is very easy to use, simply by pouring it into good qualitynwater.
  • Excellent cooling and lubricant power.
  • Efficient protection of machined parts and machines against corrosion.
  • Good mechanical performances, providing:

– Reduced cutting efforts

– Extended tool lifetime

– Very good surface finish to parts.

  • Properties in service:

– Excellent stability over time increases drain intervals;

– Cuttings have low rate of humidity;

– Good anti-foaming properties.

  • Resist to the development of bacteria and mould very well, so is more environmentally and operator friendly.
  • Very multifunctional.
  • Very good separation of tramp oils and settling of sludges.
  • Very good detergent power.

HEALTH AND SAFETY

  • Does not contain: formaldehyde liberators or boron.
  • Is free of: chlorine, PTBB, nitrite, DEA and phenol.
TYPICAL CHARACTERISTICS METHODS UNITS VULSOL MSF 7200
CONCENTRATE SOLUTION AT 5%
Density at 15°C ISO 3675 kg/m3 1122  
Viscosity at 40°C ISO 3104 mm2/s 83  
pH NF T 60 193     9.2
Refractometric factor     1.0

RECOMMENDATIONS FOR USE

  • To ensure good conservation of the fluid’s properties through time and thus increase its lifetime, we recommend:

– Regular monitoring of the concentration of the bath with a refractometer. Do not forget to multiply the reading value by the refractometric factor.

– Regular monitoring of the pH of the emulsion and the hardness of the water.

  • Total offers its clients a regular laboratory fluid analysis service:

SOLUBLE CHECK.

Get in touch with your sales contact to obtain further information.

  • Before using any fluid for the first time or before each change, we recommend cleaning the machine with a specific cleaning product:

CONTRAM CB 3.

  • If punctual top-ups of Biocide are required, Total offers an efficient product:

EBOTEC BT 80.

Your sales and technical contacts are ready to provide you further information.

 

 

Bao bì: Can 20 lít

Thông số kỹ thuật:

Đang cập nhật…